SRT-4902
|
 |
|
General information
- Free to Air , Auto Scan/TP Scan/ Blind Scan - Receiving Standard Definition and High Definition TV and Radio channels - TV Recording over USB drives (PVR-ready)* - High Speed searching program - Number of channels: MAX 5000 memory store - EPG: up to 7-days based on SI information Physical Specification - Teletext supported, Support Favorites Group - Energy saving, Standby mode less than 1W - Multi-Languages Support, PAL & NTSC Auto conversion, FULL HD Receiver - Media Player supporting MPEG2, MPEG4, MKV, AVI, FLV, JPEG, BMP, PNG, MP3, WMA ... ETC - Software update over RS-232 Serial Port , By USB, By FTP from inside the receiver, from X2 Website Satellite Front-End - Modulation: Fully Compliant with DVB-S , DVB-S2 (MPEG4 , H.264) - Input connector: F-connector LNB IN (KU/C BAND) - Frequency range: 950-2150 MHz - Symbol rate range: 2-90 MSPS - Input level: - 25 to - 65 dBm - LNB voltage: 13/18 V max 400 mA - Tone control: 22 KHZ - LNB Control: DiSEqC 1.0/1.2/1.3 USALS - KU/C Band Supported Video Decoding & Audio Decoding - Audio Channel : Mute, Left, Right and Stereo , Joint Stereo - Audio Decoding : MPEG-1 , MPEG-2 layer I and II & MPEG-4 - Video Resolution : High Definition & Standard Definition |
Rear panel Interfaces Input connector
- Satellite IF Input : F-type (LNB IN) , Loop Out - 2 x Audio L/R (RCA) - 1 x Video Signal (RCA) - 1 x RS-232 (9-pin D-sub male) - HDMI Port - LAN Port - USB (PVR & WiFi Dongle supported) USB Hub Supported - SPDIF Front panel Interfaces - Standby Power button, Menu, Ok, Volume up/down - Channel up/down and menu navigation keys - 4-character LED digits display - 1 Standby LED Indicator - 1 Signal LED Indicator - IR Sensor - CA "Multi CAS Card Reader" Power Requirements - Mains input voltage: 100V~250v - Mains input frequency: 50 / 60 Hz - Power consumption: Typ.: 8W MAX Physical Specification - Operating temperature: +5°C to +45°C - Storage temperature: -20°C to +65°C |
